LoRaScope

A single-radio LoRa / MeshCore / LoRaWAN spectrum and traffic analyser I designed and build.

LoRaScope: see what is on the air

A single-radio analyser that listens to the LoRa band and shows what is on it: live capture, packet decode and link health in one tool.

Visit the LoRaScope Site

Overview

LoRaScope is a product I designed, build and consult around. It captures LoRa traffic live, decodes packets, and shows who is transmitting, how often, and whether the link is healthy. It works at the radio layer, so you can debug a site even where there is no LoRaWAN network server and no gateway to log into.

One analyser covers LoRaWAN, LoRaBASIC and MeshCore through the same interface.

What it does

Capture & decode

Match a sender’s sync word, spreading factor, bandwidth and coding rate, and LoRaScope decodes raw frames as they arrive at the radio, without a gateway or network server. Save them to a capture store to filter, search, export and replay later.

Spectrum & link health

RSSI, SNR, source, payload, collisions and duty cycle, live, so problems on a busy or marginal band can be seen.

Emulate & inject

Emulate the hub or any node. Inject traffic to test a node in isolation, reproduce a fault or validate firmware without disturbing production hardware.

Agent & script control

The live feed and the controls are exposed over telnet and REST, so a script or an AI agent can monitor the band, act on it and observe the result. See AI & Automation.